Đề thi cuối kỳ học kỳ II môn Anh Văn chuyên ngành Cơ khí - Năm học 2015-2016

Trang 1/4 
Số hiệu: BM3/QT-PĐBCL-RĐTV 
TRƯỜNG ĐH SƯ PHẠM KỸ THUẬT TPHCM 
KHOA CƠ KHÍ CHẾ TẠO MÁY 
BỘ MÔN CÔNG NGHỆ CTM 
ĐỀ THI CUỐI KỲ HỌC KỲ II NĂM HỌC 2015-2016 
Môn: Anh Văn chuyên ngành Cơ khí (CN,CN-KTCK) 
Mã môn học: ENME320124 
Thời gian: 60 phút. 
Không được phép sử dụng tài liệu. 
SV làm bài trực tiếp trên đề thi và nộp lại đề 
Đề thi có 04 trang 
Chữ ký giám thị 1 Chữ ký giám thị 2 
Điểm và chữ ký 
CB chấm thi thứ nhất CB chấm thi thứ hai 
Họ và tên: 
Mã số SV: ................................................................... 
Số TT: ....................... Phòng thi: ............................... 
Part 1 : Choose the best answer (2.5 marks) 
Chọn Bỏ chọn Chọn lại 
1. Because ABS has high impact strength, it has applications where sudden loads may occur, 
such as ______. 
a. safety helmets b. bearings c. adhesives d. molding 
2. The machine will not start any program ______ the door is fully closed and locked. 
a. where b. unless c. if d. when 
3. It is _____ putting ideas _____ action 
a. of/about b. about/for c. about/into d. to/to 
4. They allow ______ do simple things like switch on lights, turn taps, and open doors. 
a. us about b. us on c. us for d. us to 
5. All mechanisms______some kind of motion. The four basic kinds of motion are rotary, 
oscillating, linear and reciprocating. 
a. conserve b. preserve c. revolve d. involve 
6. Engineers reduce ______by using very highly polished materials and ..their surfaces 
with oil and grease. 
a. friction/object b. buoyancy/lubricating c. elasticity/lubricating d. friction/lubricating 
7. In general, corrosion becomes worse when  are present in damp conditions. 
a. compounds b. properties c. causes d. impurities 
8. The cylindrical or post-type manipulator has oneand two linear degrees of 
freedom. 
a. linear b. reciprocating c. rotational d. spherical 
Trang 2/4 
Số hiệu: BM3/QT-PĐBCL-RĐTV 
9. In the 1980s, the United States ..with lasers as a defence .nuclear 
missiles. 
a. experimented/and b. experimented/against c. compressed/from d. communicated/again 
10. Electrical engineering includes electricity generating, electrical ., lighting, etc. 
a. installation b. ventilation c. refrigeration d. application 
Part 2 : Reading Comprehension (1.5 marks) 
Read the text and answer the questions below. 
Modern industrial robots are true marvels of engineering. A robot at the size of a normal person 
can easily carry a load of over one hundred pounds and move it very quickly with a repeatability 
of ±0.006 inches. Furthermore, these robots can do that 24 hours a day for years with no failures. 
Although they are programmable in many applications, especially in automatic manufacturing 
industries, they are programmed once and then repeat exactly the same task for years. 
Questions: 
1. What is the text about? 
________________________________________________________________________ 
2. According to the text, how heavy can a robot at the size of a normal person carry? 
________________________________________________________________________ 
 _______________________________________________________________________ 
3. How long can these robots operate without failures? 
________________________________________________________________________ 
________________________________________________________________________ 
Part 3: Grammar and Structure (2.0 marks) 
1. Combine these sentences into a complex one (1.0 marks) 
a. Nylon is self-lubricating. It is a hard, tough thermoplastic. 
______________________________________________________________________________ 
b. Copper is highly conductive. It is used for electric wiring 
______________________________________________________________________________ 
2. Rewrite the following sentences without changing the meaning by the provided words 
(1.0 marks) 
c. Place a block of wood on a flat surface. 
 A block of wood______________________________________________________________ 
d. The friction force stops the box sliding down 
It is __________________________________________________________________________ 
Trang 3/4 
Số hiệu: BM3/QT-PĐBCL-RĐTV 
Part 4: Fill in each blank with one word only as given in the table (2.0 marks) 
dies oscillating rotary linear power systems allow industry reciprocating travel 
Mechanisms are an important part of everyday life. They (1) ______ us to do simple things like 
switch on lights, turn taps, and open doors. They also make it possible to use escalators and lifts, 
(2) ______ in cars, and fly from continent to continent. 
Mechanisms play a vital role in (3)________. While many industrial processes have electronic 
control (4)________, it is still mechanisms that deliver the power to do the work. They provide 
the (5) _________ to press steel sheets into car body panels, to lift large components from place 
to place, to force plastic through (6)__________ to make pipes. 
All mechanisms involve some kind of motion. The four basic kinds of motion are: 
(7)__________: Wheels, gears, and rollers involve rotary movement. 
(8)__________: The pendulum of a clock oscillates – it swings backwards and forwards. 
Part 5: Translation (2.0 marks) 
1. Traslate the following text into Vietnamese (1.5 marks) 
In engineering, powerful laser beams can be focused on a small area. These beams can heat, 
melt, or vaporize material in a very precise way. They can be used for drilling diamonds, cutting 
complex shapes in materials from plastics to steel, for spot welding and for surfacing techniques, 
such as hardening aircraft engine turbine blades. 
______________________________________________________________________________ 
______________________________________________________________________________ 
______________________________________________________________________________ 
______________________________________________________________________________ 
______________________________________________________________________________ 
2. Translate the following sentence into English (0.5 marks) 
Robot có nhiều chức năng vì vậy vấn đề quan trọng trong thiết kế tay máy là phạm vi làm việc 
của nó. 
______________________________________________________________________________ 
______________________________________________________________________________ 
Ghi chú:Cán bộ coi thi không được giải thích đề thi. 
Trang 4/4 
Số hiệu: BM3/QT-PĐBCL-RĐTV 
Chuẩn đầu ra của học phần (về kiến thức và kỹ năng) Nội dung kiểm tra 
[CĐR G1.1]: Hiểu được, sử dụng được các từ ngữ, thuật ngữ, cấu trúc 
câu liên quan lĩnh vực cơ khí 
Part 1, Part 2, Part 3, 
Part 4, Part 5 
[CĐR G3.1]: Trình bày các vấn đề trong kỹ thuật thông qua các đoạn 
văn viết 
Part 2, Part 3, Part 5 
[CĐR G3.2]: Hiểu được các thuật ngữ tiếng Anh dùng để chỉ các tính 
chất của vật liệu; 
Part 3 
Ngày tháng năm 2016 
Thông qua bộ môn 
(ký và ghi rõ họ tên)